Ubuntu 14.04 (Linux 64 bit) – No network, no USB 3 / USB 2

This mainly applies to 970 chipset mainboards, so your mileage may vary.

Symptom, no USB 3 , or Network, or USB 2 using Ubutnu 14.04 (actually from 12.04 up) 64 bit editions. As this is a kernel problem this should affect most 64 bit linux distros, not just Ubuntu.

There seems to be a problem with all recent 64 bit linux distros and 970 chipset mainboards.

There are 3 options.

1) Use a 32 bit distro.

2) In your BIOS enable IOMMU. This will fix your network and USB 2. You probably wont have USB 3 though ūüôĀ

3) Enable IOMMU in BIOS and add iommu=soft to your grub config. This gets rid of the stream of warnings you get at boot with IOMMU enabled in BIOS. USBB 3 should work too.

sudo nano /etc/default/grub

Change the line

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

to:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash iommu=soft"

Then do

sudo update-grub

and reboot.

This should make the USB 2 and 3 work as well as networking.

Let me know what chipsets/mainboards this helped you with.

[updated]
Changed option 3 as noted by Anthony Barnett. Many hanks for the feedback Anthony.
[/updated]

BaDboD

Asus DSL-N12U wireless.

Been playing with this wireless modem for a couple weeks now, and it is looking good.

As you would expect, it does the AP/Extender/router etc as needed. The real nice bit is the network map. From here I can see all clients and assign priority in a simple click interface. I am used to doing this in iptables, so very nice to point and click direct on the modem instead of having to have a gateway server; or far more expensive device.

Very impressive for a consumer device, though I am concerned about how ‘warm’ it is.

I had to tweak the SNR for good stability ( Stability Adjustment -3dB ) or I was getting DSL disconnect every ~8-~19 hours.

I am not used to having such options in consumer devices anyway. Very nice. My ISP supports modem down-rating for SNR so your mileage might vary.

One¬†down, I guess, is that it had to be tweaked. Looks to be aimed at the ‘enthusiast’ or ‘IT guy at home’ market. You have to understand the logs and adjust according to your connection. Somewhat above the average home user ability?

My main concern is how hot it is. Not uncommon with this type of device, sadly.

It is very stable and has much more control than I am used to for  a consumer priced device.

Very nice bit of kit. Same price as numb nuts devices but with ‘nerd’ perks. For the geeks amongst us I recommend this one.

Reliability setting at default 

SNR down 30.4 : SNR up 27.8 , DSL down every ~15 hours.

Reliability Setting at -3dB

SNR down 26.2 : SNR up 27.8 and has been up for over a week.

Given that SNR is acceptable at 6, then I can still play with it a lot more if it does decide to be unreliable.

Obviously I am looking for a reliable device. I go away for weeks at a time and need the device to continue working reliably. Once adjusted, the Asus appears to be doing exactly that.

For the non geeks, then I suggest you buy the most reasonably priced thing for your needs and put up with rebooting it now and then when it stops doing it’s job.

The Asus DSL-N12U wireless costs about the same as other home user wireless modems. It is not for the average home user though.

BaDbod

Easily find the IP address of your home computer from a remote location.

No registration required. No email address needed, No user details. No software setup.

Home-IP

From your home computer simply open the web page, enter any Username/Password/Computer-Name of your liking, and GO>>.

From your roaming device (laptop etc) visit the site, enter the same details and viola! You can see your home IP address, from anywhere in the world.

While there are several ‘dynamic DNS’ services around, and remote control software, very few are free, ALL require registration requiring you to ¬†hand over your email address and other personal details. Then there’s the client software setup etc.

If all you want is to know your home IP address, from anywhere, easily and simply; this is as easy and simple as it gets.

Home-IP

Skype 4.1 , Ubuntu 12 – Distorted audio / sound

If your getting distortion when you open Skype, and/or distorted sound when Skype make a notification sound, read on …..

Go to Skype – Options – Sound Devices. Un-tick “Allow skype to automatically adjust my mixer levels”

If your STILL getting distortion open a command prompt and type

sudo nano /etc/pulse/default.pa

Add tsched=0 to the end of the line that reads ‘load-module module-udev-detect’ so it looks like…

load-module module-udev-detect tsched=0

Save (CTRL-X¬† –¬† Y¬† –¬† Enter)¬† and reboot.

Your good to go.

BaDboD

5.1 Realtek HD Audio, only front speakers working in Ubuntu 12 ?

Open a command prompt and enter

sudo alsamixer

then press F6 and select your sound card.

Use left/right arrow key to highlight ‘Channel’ at the bottom, then use up down key to select the number of speakers you have e.g. 5.1 so you should select 6. Press escape when done.

To restore this after a reboot type

sudo alsactl store

Your done.

Just make sure you have ‘5.1 out’ selected in the desktop volume control – settings for your audio card and you should now have full 5.1 sound.

Let me know if this works for you using other modes like 7.1 or just 4 speakers etc. It should.

Enjoy

BaDboD